Dosimetric characteristics of aqueous solution of crystal violet for applications in food irradiation

Aqueous solution of crystal violet has been evaluated spectrophotometrically as a gamma-ray chemical dosimeter. The response of the chemical dosimetric system has also been investigated under different environmental conditions, such as light and temperature. In the present study the response has been measured at two wavelengths; 588 nm (λ_max of the irradiated solution) and 500 nm. The response of the crystal violet dosimeter was linear in the dose range of 50–550 Gy at pH 5.6 when absorption measurements were made at 588 and 500 nm. The response of the crystal violet dosimeter during post-irradiation storage at room temperature in dark showed slight decrease in absorbance at 588 and 510 nm but the response was almost stable at 460 nm. For higher doses, the change in the response was greater as compared to the low doses. Post-irradiation stability during diffused sunlight showed significant decrease in the response for higher dose at 588 and 510 nm and slower decrease in the response for lower dose at the above mentioned wavelengths. However the response was almost stable up to 97 days at 460 nm for higher and lower doses. At 4 °C, the decrease in the absorbance was slower at 588 and 510 nm while the response was almost constant at 460 nm. At higher temperatures, such as 40 °C, the decrease in the absorbance was greater at 588 and 510 nm while at 460 nm the absorbance was almost constant for about 3 months.     

Enhancement of the photocatalytic activity of TiO(2) by doping it with calcium ions

Titanium dioxide (TiO(2)) with an enhanced photocatalytic activity was developed by doping it with calcium ions through a sol-gel method. The developed photocatalysts were characterized by Fourier transform infrared (FTIR) spectroscopy, N(2) physisorption, X-ray photoelectron spectroscopy (XPS), and X-ray diffraction. Their surface morphologies were studied using surface scanning electron microscopy (SEM). The XPS analyses confirmed the presence of Ti, O, Ca, and C in the Ca-doped TiO(2) sample. The activities of the catalysts were evaluated by photocatalytic degradation of an azo dye, acid red 1 (AR1), using UV light irradiation. The results of the investigations revealed that the samples calcined at 300 °C for 3.6h in a cyclic (2 cycles) mode had the best performance. Lower percentage dopant, 0.3-1.0 wt.%, enhanced the photocatalytic activity of TiO(2), with the best at 0.5 wt.% Ca-TiO(2). The performance of 0.5 wt.% Ca-TiO(2) in the degradation of AR1 was far superior to that of a commercial anatase TiO(2) Sigma product CAS No. 1317-70-0. The effect of pH on the degradation of AR1 was studied, and the pH of the dye solution exerted a great influence on the degradation of the dye.     

Growth and optical characterization of organic nonlinear optical crystal: indole-3-aldehyde

The metastable zone width for the solution of organic nonlinear material: indole-3-aldehyde (IA) has been determined for the various solvents of acetone, methanol and ethyl acetate and the corresponding IA crystals have been grown by temperature lowering technique. The surface analysis on different planes of the grown crystals has been carried out. The range of transmission and powder second harmonic generation efficiency of IA have been reported.     

Creeping flow analysis of slightly non-Newtonian fluid in a uniformly porous slit

This paper provides the analysis of the steady, creeping flow of a special class of slightly viscoelastic, incompressible fluid through a slit having porous walls with uniform porosity. The governing two dimensional flow equations along with non-homogeneous boundary conditions are non-dimensionalized. Recursive approach is used to solve the resulting equations. Expressions for stream function, velocity components, volumetric flow rate, pressure distribution, shear and normal stresses in general and on the walls of the slit, fractional absorption and leakage flux are derived. Points of maximum velocity components are also identified. A graphical study is carried out to show the effect of porosity and non-Newtonian parameter on above mentioned resulting expressions. It is observed that axial velocity of the fluid decreases with the increase in porosity and non-Newtonian parameter. The outcome of this theoretical study has significant importance both in industry and biosciences.     

Slotted microcavity ring resonators for optical storage applications

In this paper, slotted microcavity ring resonators based optical storage devices are proposed and analyzed by means of multiresolution time domain technique. The effect of the structure geometrical parameters on the coupling efficiency, normalized transmission spectra and quality factor has been thoroughly investigated and compared to that of the conventional no-slot microring resonator. The suggested slotted configurations increase the quality factor at a fixed gap size between the central ring and input/output waveguides. In addition, the desired compromise between the coupling efficiency and resonance effect inside the ring can be achieved by mere optimization of the slot geometrical characteristics.     

The effect of substitution on the intramolecular hydrogen bonding in 3‐hydroxy‐propenethial

The intramolecular hydrogen bond strength of 3‐hydroxy‐propenethial (HPT) as well as the fluoro, chloro, bromo, and methyl derivatives were investigated at the B3LYP/6‐311++G^** level of theory. Solvent‐based calculations (in water) for HPT and derivatives were also carried out. The nature of the intramolecular hydrogen bond existing within the molecular under investigation has been studied by means of the Bader theory of atoms in molecules (AIM) that is based upon the use topological properties in terms of the electron density. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Efficient and practical method for the synthesis of hydrophobic azines as liquid crystalline materials

A series of hydrophobic symmetrical azines: 1,2-bis[4-(n-alkoxy)benzylidene]hydrazine (where, n-alkoxy: O(CH₂)_nH, n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 16, or 18) have been prepared following an efficient and practical method. These compounds have been synthesized via the condensation reaction of hydrazine hydrate and appropriately 4-(n-alkoxy) benzaldehydes in acidic medium under ambient conditions. The prepared organic compounds have been characterized and their structures were elucidated depending upon micro-elemental analysis and spectral data (IR, UV-Vis, ¹HNMR, ¹³C{¹H}NMR, 2D ¹H-¹H-cozy, 2D ¹H-¹³C-HSQC, and mass spectra). Liquid crystalline behavior of the prepared compounds was studied using polarized light optical microscopy and differential scanning calorimetry techniques. This study revealed that all the compounds displayed enantiotropic liquid crystal properties, exhibiting smectic and nematic mesophases.     

Synthesis of new 1,2,4-oxadiazolidin-5-ylthiophenes and thienopyrimidine derivatives by aza-Wittig reaction using a thienyl carbodiimide

Azidation of aminothiophene derivative 1 afforded the corresponding azido derivative 2.The latter reacted with triphenylphosphine to afford iminophosphorane derivatives 3.Reacting 3 with phenylisocyanate gave the highly reactive carbodiimide intermediate 4,which was reacted with different nitrones to afford new l,2,4-oxadiazolidin-5-ylidene-aminothiophenes 5a-c. Treatment of 4 with absolute EtOH at room temperature gave methyleneamino-5-(methylthio)thiophene 7,(methylthio)-3-(3- phenylureidothiophene)-2-carboxylate 8 or thienopyrimidine 9 and 10 at refluxing temperature.Finally reaction of carbodiimide intermediate 4 with different secondary amines gave the new thienopyrimidines 11a-c.